Radio Shack DX-398 Timer Functions, Using The Timer Alarms, Setting an Alarm, Silencing the Alarm

Models: DX-398

1 48
Download 48 pages 11.49 Kb
Page 32
Image 32
TIMER FUNCTIONS

TIMER FUNCTIONS

USING THE TIMER

ALARMS

Your receiver has three timer alarms. You can set these alarms to sound (buzzer or radio) at a time you set.

Setting an Alarm

1.If you want the radio to turn on at the alarm time, tune to the desired station. Then press M/MEM. MEMO and the memory location where the station is programmed flash for about 10 seconds.

2.Press TIMER 1, TIMER 2, or TIMER

3 twice. USING THE TIMERTIMERSetting an Alarm, the selected timer

number, and Silencing the AlarmUsing the Snooze Feature (buzzer) flash for about 10 seconds.

Note: If MEMO stops flashing before you press TIMER 1, TIMER 2, or TIMER 3, start again from Step 2.

3.To select the type of alarm (buzzer or radio), repeatedly press AM

MODE until

 

for the buzzer

or

for the radio flashes next

to

 

.

 

 

 

TIMER

 

 

 

Note: If Manual backgroundManual background or Manual backgroundManual background , stops flashing before you press AM MODE, start again from Step 2.

4.Use the number keys to enter the time you want the alarm to sound.

5.Press ENTER Manual backgroundManual background .

6.Turn the receiver off.

Silencing the Alarm

When the display shows the alarm time, the radio turns on or the buzzer sounds and Manual backgroundTIMERManual background, 1, 2, or 3, and Manual background

or Manual backgroundManual background flash on the display.

If you selected the buzzer, its volume increases after several seconds. After a few more seconds, the buzzer’s vol- ume increases again. Then, after 60 seconds, the buzzer turns itself off and sounds again the next day at the set time.

If you selected the radio, it automati- cally turns off after 60 minutes. To si- lence the radio or the buzzer sooner, press POWER to turn off the receiver. Manual backgroundTIMERManual background, 1, 2, or 3, and Manual backgroundManual background or Manual backgroundManual background dis- appear and the alarm sounds again the next day at the set time.

Using the Snooze Feature

To silence the buzzer or radio alarm for about 5 minutes, press any button ex-

cept POWER,

, or

M

. Z Z Z

flashes above

 

. This temporarily

 

 

 

 

 

 

 

silences the buzzer or radio and then it sounds again. You can repeat this for up to 30 minutes using the buzzer alarm or up to 60 minutes using the ra- dio alarm.

Note: The snooze feature does not work if a plug is connected to the REC LINE OUT jack.

32

Page 32
Image 32
Radio Shack DX-398 owner manual Timer Functions, Using The Timer Alarms, Setting an Alarm, Silencing the Alarm