4.Use the number keys to enter the new memory location number. The receiver beeps.
USING PRIORITY
You can store one MW/LW/FM station as the priority station, then quickly re- call it.
1.Tune to your favorite station.
2.Press M/MEM.
3.Press PRIORITY to store the sta- tion in the priority location.
Note: If you previously stored a priority station, pressing PRIORITY replaces it.
4.To tune to the priority station, press PRIORITY. The receiver tunes to the priority station.
The receiver stores a SW priority sta- tion differently than an MW/LW/FM station. It stores a page containing 9 stations (including the SW station you want to store as the priority station) in a memory location.
1.Use the steps under “Tuning Pre- programmed Shortwave Stations” on Page 20 to tune to the page where you stored your favorite shortwave station.
2.Press M/MEM to store the page containing the desired station.
3.Press PRIORITY to store the page with the desired station in the pri- ority location.
Note: If you previously stored a priority station, pressing PRIORITY replaces it.
4.To tune to the priority station, press PRIORITY. The receiver tunes to the page you selected then to the strongest frequency among the 9 preset stations.
Note: If there is a stronger station on the page you selected, the receiver might tune to it instead of the station you selected.
5.Press the memory location num- ber you selected in Step 1 under “Tuning Preprogrammed Short- wave Stations” on Page 20 to tune to the priority station.
31
