Radio Shack DX-398 owner manual Setting And Viewing The Local Time

Press M to lock all the front panel

buttons and ROTARY TUNING. ap- pears.

You can still adjust VOLUME, TONE, and other controls.

To unlock the buttons, press M

again. disappears.

SETTING AND VIEWING THE LOCAL TIME

Your receiver has two clocks. One dis- plays your local time and the other lets you display the time in any of 42 preset world cities or a world city you specify. Once you set your local time, the re- ceiver automatically calculates the cor- rect time in each of the preset world cities or a world city that you specify and lets you select and display that time.

The time zone map on the back of the receiver shows the difference in hours between UTC (Universal Time Coordi- nate — formerly called Greenwich Mean Time) and each time zone. To determine your local time from UTC, add or subtract the specified number from UTC time. During Daylight Saving Time, add one more hour.

The clock display shows a random time when you install batteries. Follow these steps to set the local time in the 24-hour format (0:00 – 23:59).

1.Repeatedly press WORLD/HOME until HOME flashes.

2.Rotate MANUAL TUNING until the name of your city (or a city in the same time zone) appears, then

press ENTER . The receiver beeps and the city’s name ap- pears for 2 seconds then disap- pears. HOME and the time ap- pear on the display.

3.Press SET. HOME flashes.

4.While HOME flashes, use the number buttons to enter the cor- rect time.

Notes:

•If HOME stops flashing before you press a number button, start again at Step 3.

•Do not precede single-digit hours with a 0. For example, enter 930 for 9:30 AM.

•If you make a mistake, press C to erase the last digit, then enter the correct digit.

16