•If you enter an invalid time, the clock beeps twice and E (error) appears for about 1 second. Repeat Steps
5.Press ENTER 
. The time you set appears, and the seconds start counting from 0.
Note: The receiver does not dis- play the seconds.
VIEWING A WORLD TIME
Important: You need to set your local time before following these steps. See “Setting and Viewing the Local Time” on Page 16.
1.Repeatedly press WORLD/HOME until WORLD flashes.
2.Rotate MANUAL TUNING until the name of the world city (or a city in the same time zone) appears. The current time in that city appears on the display.
3.To save the displayed city as your
world city, press ENTER 
. WORLD stops flashing. Then, the world city’s name disappears from the display within 2 seconds.
4.To return to your home time, repeatedly press WORLD/HOME until HOME
flashes. Your home city’s name and the time in that city appear.
5.Press ENTER 
. HOME
stops flashing.
CHANGING A WORLD CITY NAME
You can change the name of any of the preprogrammed world cities to a name you choose, then save the new name in the receiver’s memory.
1.Repeatedly press WORLD/HOME until HOME
flashes.
2.Turn MANUAL TUNING to select a city in the same time zone as the city you want to change.
3.Press EDIT. The first character of the city’s name flashes.
4.Turn MANUAL TUNING to select the desired character.
5.When the character you want
appears, press TUNING 
to move to the next position, then turn MANUAL TUNING to enter the next character (up to 8 charac- ters).
Note: If you want to correct a character you entered, press TUN-
ING 
to move back to it.
6.Press ENTER 
. The receiver stores the name of the world city you entered.
17
