Maintenance
Resetting the Motor Thermostat
Your Infinity Upright Vacuum is equipped with a protective Motor Thermostat. If the motor should overheat, the thermostat shuts off the power.
To reset the Motor Thermostat:
Move the Power Button to the “O – Off” position.
Unplug the vacuum.
Check for clogged hose or filter; unclog hose and replace filter. Refer to Checking for Blockages on page13.
Wait 45 minutes for vacuum to cool; then plug in the vacuum.
Turn the Power Switch to the “I – On” position to start the vacuum.
Note: if vacuum still does not start, contact Customer Service at:
1-888-668-9600.
14
TOLL FREE:
