Infinity NV22Q Problem, Suggested Action, Thermostat on page, Checking for Blockages on next page

Troubleshooting

WARNING: to reduce the risk of electric shock, the power cord must be disconnected before performing maintenance/troubleshooting checks.

Problem	Suggested Action
Vacuum will not run.	Check to see if plugged in properly.
	Check circuit breaker/fuse.
	Check On/Off switch.
	If vacuum still does not run, see Resetting the Motor
	Thermostat on page 14.
Vacuum is not picking up dirt.	Check the Dust Cup.
	Check the Foam Filters.
	If the Dust Cup and Filter don’t require cleaning, check for
	blockages, see Checking for Blockages on the next page.
Vacuum pushes scatter rugs (lightweight, movable rugs) on	Move Power Switch setting to position “I – suction only” to
	disengage the Brush Roll.
Power Switch position “II – Brush Roll on.”
Brush roll does not turn on.	Pull handle toward you and release the Floor Power Nozzle to
	disengage the auto-off feature.
	Select Power Switch position “II – Brush Roll on.”
	If red light is illuminated on the Floor Power Nozzle, see
	Checking for Blockages on next page.
Vacuum turns off on its own.	Motor Thermostat needs to be reset; see Resetting the Motor
	Thermostat on page 14.
Airflow is restricted.	Check for blockages; see Checking for Blockages on
	next page.
	Check attachments for suction strength; clear blockages,
	as required.
	Clean the Dust Cup, Cyclonic Chamber and the Foam Filters.

12

TOLL FREE: 1-888-668-9600