6
Optional Features (on selected models)
Adjustable Steam Switch
This knob provides steam for fabrics
such as wool and linen. See the
“Fabric Setting Chart” for details. Set
the switch to Dry Iron to iron with-
out steam.
Spray and Blast of Steam
Buttons
Push Blast Button for an extra blast of
steam. Push Spray Button to release a
fine spray
of water for difficult
wrinkles
in cotton or linen.
Auto Shutoff Reset Button/Light
This light comes on when the iron is
first plugged in.
After one hour, the
iron will shut off
and the light will
go out. Push the
Reset Button/
Light to turn the
iron back on.
Power On Light
On units not provided with Auto
Shutoff, this light comes on when the
iron is plugged in and remains on until
the iron is unplugged. The light stays
on even if Temperature Control Dial is
turned to OFF (O).
Vertical Steam
1. Follow Steps 1 through 6 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from
heat or moisture. Do not hang in
front of wallpaper, window, or mirror.
3. Hold iron about 6 inches away from
garment and
press and
release Blast
Button to steam
out wrinkles. Do
not press Blast
Button more
than once every
2 seconds.
4. To turn iron off, turn Temperature
Control Dial to OFF (O). Unplug
iron.
5. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
Retractable Cord
1. Pull cord to desired length. Do not
unwind cord beyond colored tape
indicator on cord.
2. To store cord, press and hold the
Cord Release
Button while
guiding the
cord into the
storage area.
CAUTION: Hold plug while retracting
cord. Do not let cord retract freely.
Cord may jam on reel or loose cord
may whip back and forth and could
cause injury.
840131800 ENv01.qxd 10/22/04 10:32 AM Page 6