Siemens S223, S323 user manual Command Mode Description Route-map TAG deny permit

User Manual			UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	redistribute {kernel connected
	static ospf bgp}
	redistribute {kernel connected
	static ospf bgp } metric <0-16>		Registers transmitted routing information in another
			router’s RIP table.
	redistribute {kernel connected	Router
	static ospf bgp } route-map		1-16: metric value
	WORD		WORD: pointer to route-map entries
	redistribute {kernel connected
	static ospf bgp } metric <0-16>
	route-map WORD

To delete the configuration for redistributing routing information in another router’s RIP ta- ble, use the following command.

Command	Mode	Description
no redistribute {kernel con-
nected static ospf bgp}
no redistribute {kernel con-
nected static ospf bgp } met-
ric <0-16>		Removes the configuration of transmitted routing in-
	Router
no redistribute {kernel con-
		formation in another router’s RIP table.
nected static ospf bgp}
route-map WORD
no redistribute {kernel con-
nected static ospf bgp } met-
ric <0-16>route-map WORD

As the needs of the case demand, you may also conditionally restrict the routing informa- tion between the two networks using route-mapcommand.

To permit or deny the specific information, open the Route-map Configuration mode using the following command in Global Configuration mode.

Command	Mode	Description
route-map TAG {deny permit}		Creates the route map.
	Global	TAG: route map tag
<1-65535>
		1-65535: sequence number

One or more match and set commands typically follow route-mapcommand. If there are no match commands, then everything matches. If there are no set commands, nothing is done. Therefore, you need at least one match or set command.

Use the following command on Route-map Configuration mode to limit the routing infor- mation for transmitting to other routers’ RIP table.

A50010-Y3-C150-2-7619 365