Siemens S323, S223 Query Interval of Igmp v2 Snooping Querier, 292 A50010-Y3-C150-2-7619

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

The Query Interval of IGMP v2 Snooping Querier

To configure a query interval of the querier, use the following command.

Command		Mode	Description
			Configures the IGMP snooping querier query interval
ip igmp snooping querier query-			on the system.
interval <1-1800>			1-1800: IGMP snooping querier query interval in sec-
		Global	onds
ip igmp snooping vlan	VLANS		Enables the IGMP snooping querier on a VLAN inter-
			face.
querier query-interval <1-1800>
			VLANS: VLAN ID

To disable the query interval of the querier, use the following command.

Command		Mode	Description
no ip igmp snooping	querier		Disables the IGMP snooping querier interval.
query-interval
		Global
no ip igmp snooping vlan			Disables the IGMP snooping querier interval on a
VLANS querier query-interval			VLAN interface.

The Timeout Value of IGMP v2 Snooping Querier’s General Query

Use this following command to configure the max response time in which the reply for the IGMP snooping query being sent should be received.

Command	Mode	Description
ip igmp snooping querier max-		Configures the IGMP snooping max-response-time
		interval on the system.
response-time <1-25>
		1-25: The maximum response time in seconds
	Global
ip igmp snooping vlan VLANS		Enables the IGMP snooping max-response-time on a
querier max-response-time <1-		VLAN interface.
25>		VLANS: VLAN ID

To disable the max-response-time, use the following command.

	Command		Mode	Description
no ip igmp snooping querier				Disables the IGMP snooping max-response-time inter-
max-response-time				val.
			Global
no ip	igmp	snooping vlan		Disables the IGMP snooping max-response-time on a
VLANS	querier	max-response-
				VLAN interface.
time

292 A50010-Y3-C150-2-7619