Siemens S323, S223 Layer 3 Switch 2 IP Address 10.0.0.2/24, SWTICH1config# router vrrp default

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

The following is an example of configuring Master Router and Backup Router by compar- ing their Priorities: Virtual Routers, Layer 3 SWITCH 1 – 101 and Layer 3 SWITCH 2 –

102.Then, regardless of IP addresses, one that has higher Priority, Layer 3 SWITCH 2 becomes Master Router.

<Layer 3 SWITCH1: IP Address - 10.0.0.1/24>

SWTICH1(config)# router vrrp default 1

SWITCH1(config-router)# associate 10.0.0.5

SWITCH1(config-router)# vr-priority101

SWITCH1(config-router)# exit

SWITCH1(config)# show vrrp

default - virtual router 1

----------------------------------------------

state	backup
virtual mac address	00:00:5E:00:01:01
advertisement interval	1 sec
preemption	enabled
priority	101
master down interval	3.624	sec

[1] associate address : 10.0.0.5

<Layer 3 SWITCH 2: IP Address - 10.0.0.2/24>

SWTICH2(config)# router vrrp default 1 SWITCH2(config-router)#associate 10.0.0.5 SWITCH1(config-router)#vr-priority 102 SWITCH2(config-router)#exit SWITCH2(config)# show vrrp

default - virtual router 1

----------------------------------------------

state	master
virtual mac address	00:00:5E:00:01:01
advertisement interval	1 sec
preemption	enabled
priority	102
master down interval	3.620 sec

[1] associate address : 10.0.0.5

SWITCH 2 with higher priority is configured as Master.

By default, Priority of the hiD 6615 S323 is configured as “100”. So, unless you configure specific Priority, this switch becomes Master Router because a device, which has lower IP address, has higher precedence.

Also, when there are more than two Backup Routers, IP addresses are compared to de- cide order. The following is an example of configuring Master Router and Backup Router by comparing IP addresses: Virtual Routers, Layer 3 SWITCH 1 – 10.0.0.1 and Layer 3 SWITCH 2 – 10.0.0.2.

230 A50010-Y3-C150-2-7619