Siemens S223, S323 user manual Session Reset of Specific Route, Session Reset of External Peer

User Manual			UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
	Command	Mode	Description
	clear ip bgp <1-65535>soft [in		Updates the route information only while the session is
	out]		possible of BGP neighboring routers which are config-
	clear ip bgp <1-65535>ipv4	Global	ured a particular AC number. Apply the route either
	{unicast multicast} soft [in		incoming or outgoing routes.
	out]		1-65535: AS number

10.1.5.3Session Reset of Specific Route

To reset the sessions of BGP neighboring router with specified IP address, use the follow- ing command.

Command		Mode	Description
clear ip bgp	ROUTE-IP-	Global	Resets the sessions of BGP neighboring router with
ADDRESS			specified IP address.

i

See Section 10.1.5.1 when you configure the detail parameters.

To reset the sessions of BGP neighboring router with specified IP address and initialize the details of route configurations, use the following command.

Command	Mode	Description
clear ip bgp A.B.C.D in [prefix-		Resets the session of BGP neighboring router con-
filter]		tained specified IP address.
		in: clears incoming advertised routes.
clear ip bgp A.B.C.D ipv4 {uni-		prefix-filter: pushes out prefix-list ORF and does in-
cast multicast} in [prefix-filter]		bound soft reconfiguration.
		A.B.C.D: route IP address
clear ip bgp A.B.C.D out		Resets the session of BGP neighboring router with
	Global	specified IP address.
clear ip bgp A.B.C.D ipv4 {uni-		A.B.C.D: route IP address
cast multicast} out		out: clears outgoing advertised routes.
		unicast multicast: address family modifier
clear ip bgp A.B.C.D soft [in		Updates the route information only while the session is
out]		possible of BGP neighboring router with specified IP
		address. Apply the route either incoming or outgoing
clear ip bgp A.B.C.D ipv4 {uni-
		routes.
cast multicast} soft [in out]
		A.B.C.D: route IP address

10.1.5.4Session Reset of External Peer

You can reset the session of BGP router connected to external AS. To reset a BGP con- nection for all external peers, use the following command.

Command	Mode	Description
clear ip bgp external	Global	Resets the session of all external AS peers.

A50010-Y3-C150-2-7619 329