Siemens S323, S223 user manual Dhcp Pool Creation, Dhcp Subnet, Range of IP Address

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

8.8.1.1DHCP Pool Creation

The DHCP pool is a group of IP addresses that will be assigned to DHCP clients by DHCP server. You can create various DHCP pools that can be configured with a different network, default gateway and range of IP addresses. This allows the network administra- tors to effectively handle multiple DHCP environments.

To create a DHCP pool, use the following command.

Command	Mode	Description
ip dhcp pool POOL		Creates a DHCP pool and opens DHCP Pool Configu-
	Global	ration mode.
no ip dhcp pool POOL		Deletes a created DHCP pool.

The following is an example of creating the DHCP pool as sample.

SWITCH(config)# service dhcp

SWITCH(config)# ip dhcp pool sample

SWITCH(config-dhcp[sample])#

8.8.1.2DHCP Subnet

To specify a subnet of the DHCP pool, use the following command.

Command	Mode	Description
network A.B.C.D/M		Specifies a subnet of the DHCP pool.
	DHCP Pool	A.B.C.D/M: network address
no network A.B.C.D/M		Deletes a specified subnet.

The following is an example of specifying the subnet as 100.1.1.0/24.

SWITCH(config)# service dhcp

SWITCH(config)# ip dhcp pool sample

SWITCH(config-dhcp[sample])# network 100.1.1.0/24

SWITCH(config-dhcp[sample])#

i

You can also specify several subnets in a single DHCP pool.

8.8.1.3Range of IP Address

To specify a range of IP addresses that will be assigned to DHCP clients, use the follow- ing command.

Command	Mode	Description
range A.B.C.D A.B.C.D		Specifies a range of IP addresses.
	DHCP Pool	A.B.C.D: start/end IP address
no range A.B.C.D A.B.C.D		Deletes a specified range of IP addresses.

240 A50010-Y3-C150-2-7619