Siemens S223 Document Convention, Document Notation, CE Declaration of Conformity, Information

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

1.3Document Convention

This guide uses the following conventions to convey instructions and information.

i

!

Information

This information symbol provides useful information when using commands to configure and means reader take note. Notes contain helpful suggestions or references.

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury or broke the equipment. Before you work on any equipment, be aware of the hazards in- volved with electrical circuitry and be familiar with standard practices for preventing acci- dents by making quick guide based on this guide.

1.4Document Notation

The following table shows commands used in guide book. Please be aware of each command to use them correctly.

Notation	Description
a	Commands you should use as is.
NAME, PROFILE, VALUE, …	Variables for which you supply values.
PORTS	For entry this variable, see Section 5.1.
[ ]	Commands or variables that appear within square brackets [ ] are
	optional.
< >	Range of number that you can use.
{ }	A choice of required keywords appears in braces { }. You must se-
	lect one.
	Optional variables are separated by vertical bars .

Tab. 1.2 Command Notation of Guide Book

1.5CE Declaration of Conformity

The CE declaration of the product will be fulfilled if the construction and cabling is under- taken in accordance with the manual and the documents listed there in, e.g. mounting in- structions, cable lists where necessary account should be taken of project-specific docu- ments.

Deviations from the specifications or unstipulated changes during construction, e.g. the use of cable types with lower screening values can lead to violation of the CE require- ments. In such case the conformity declaration is invalidated and the responsibility passes to those who have caused the deviations.

A50010-Y3-C150-2-7619 21