Siemens S223, S323 Following is an example of disabling Preempt, A50010-Y3-C150-2-7619 233

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To configure an authentication password for security of Virtual Router, use the following command on VRRP configuration mode.

Command	Mode	Description
authentication clear_text		Configures an authentication password.
PASSWORD	VRRP
no authentication		Deletes a configured authentication password.

i

Authentication password can be configured with maximum 7 digits.

The following is an example of configuring Authentication password in Virtual Router as network and showing it.

SWITCH(config-vrrp)#authentication clear_text network

SWITCH(config-vrrp)# show running-config

Building configuration...

(Omitted)

vrrp default 1

authentication clear_text network associate 10.0.0.5

no snmp SWITCH(config-vrrp)#

8.4.1.6Preempt

Preempt is a function that an added device with the highest Priority user gave is auto- matically configured as Master Router without rebooting or specific configuration when you add an other device after Virtual Router is configured.

To configure Preempt, use the following command on VRRP configuration mode.

Command	Mode	Description
preempt {enable disable}	VRRP	Enables or disables Preempt. (default: enable)

The following is an example of disabling Preempt.

SWITCH(config-vrrp)# preempt disable

SWITCH(config-vrrp)# exit

SWITCH(config)# show vrrp

default - virtual router 1

----------------------------------------------

state	master
virtual mac address	00:00:5E:00:01:01
advertisement interval	1 sec
preemption	disabled
priority	100
master down interval	3.624 sec

[1]associate address : 10.0.0.5 SWITCH(config)#

A50010-Y3-C150-2-7619 233