Siemens S323, S223 Priority of Member Port, Priority of Switch, 198 A50010-Y3-C150-2-7619

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To delete key value of configured member port, use the following command.

Command	Mode	Description
no lacp port admin-key PORTS	Bridge	Deletes key value of selected member port, select the
		member port number.

8.2.2.7Priority of Member Port

To configure priority of LACP member port, use the following command.

Command	Mode	Description
lacp port priority PORTS <1-	Bridge	Sets the LACP priority of member port, select the port
65535>		number. (default: 32768)

To remove port priority of configured member port, use the following command.

Command	Mode	Description
no lacp port priority PORTS	Bridge	Deletes port priority of selected member port, select
		the member port number.

8.2.2.8Priority of Switch

In case the member ports of connected switches are configured as Active mode (LACP system enabled), it is required to configure which switch would be a standard for it. For this case, the user could configure the priority on switch. The following is the command of configuring the priority of the switch in LACP function.

Command	Mode	Description
lacp system priority <1-65535>	Bridge	Sets the priority of the switch in LACP function, enter
		the switch system priority. (default: 32768)

To delete the priority of configured switch, use the following command.

Command	Mode	Description
no lacp system priority	Bridge	Clears the priority of the configured switch.

198 A50010-Y3-C150-2-7619