Siemens S223, S323 user manual Configuration Management, Assigning IP Address of FTP Client

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

6.1.14Assigning IP Address of FTP Client

i

Serveral IP addresses can be assigned on hiD 6615 S223/S323. But user can specify one source IP address connecting FTP server when the switch is a client. To configure FTP binding address as a source IP address when hiD 6615 S223/S323 as a client con- nects to FTP server, use the following command.

Command	Mode	Description
ftp bind-address A.B.C.D		Binds a source IP address for connecting to FTP
	Global	server..
no ftp bind-address		Deletes FTP bind-address

Please be careful that the FTP bind-address is also applied to TFTP server’s bind- address.

6.2Configuration Management

You can verify if the system configurations are correct and save them in the system. This section contains the following functions.

•Displaying System Configuration

•Saving System Configuration

•Auto-Saving

•System Configuration File

•Restoring Default Configuration

6.2.1Displaying System Configuration

To display a current running configuration of the system, use the following command.

Command	Mode	Description
show running-config		Shows a configuration of the system.
show running-config {admin-
rule arp bridge dns full
hostname instance interface
INTERFACE I login pm qos		Shows a configuration of the system with the specific
rmon-alarm rmon-event rmon-	All	option.
history router {bgp pim rip
ospf vrrp} rule snmp syslog
time-out time-zone time-out}
show running-config router		Shows only the configuration that corresponds to each
{bgp ospf pim rip vrrp}		option.

A50010-Y3-C150-2-7619 91