Siemens S323 Area Range, Shortcut Area, 346 A50010-Y3-C150-2-7619, C.D/M advertise not Advertise

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

10.2.6.5Area Range

In case of OSPF belongs to several Areas, Area routing information can be shown in one routing path. Like as above, various routing information of Area can be combined and summarized to transmit to outside.

To summarize and combine the routing information, use the following command.

Command	Mode	Description
area <0-4294967295> range
A.B.C.D/M		Configures to use summarized information for assigned
	Router
area <0-4294967295> range
		path.
A.B.C.D/M {advertise not-
advertise}

Use advertise option to transmit summarized routing information with using summarized information. And use the not-advertiseoption to block the transmission of summarized routing information to outside.

To release the configuration, use the following command.

Command	Mode	Description
no area <0-4294967295> range
A.B.C.D/M		Releases the configuration to use summarized informa-
	Router
no area <0-4294967295> range
		tion for assigned path
A.B.C.D/M {advertise not-
advertise}

10.2.6.6Shortcut Area

Backbone Area is the default Area among the Areas of OSPF. All traffic should pass the Backbone Area and OSPF network must be planned for that, but there is some efficiency way which is not to pass the Backbone Area. That is Shortcut, and it must be configured for efficient traffic in every ABR type, see Section 10.2.2.

To configure the shortcut option, use the following command.

Command	Mode	Description
area <0-4294967295> shortcut	Router	Configures the shortcut option.
{default disable enable}

To releases the configured shortcut option, use the following command.

Command	Mode	Description
no area <0-4294967295> short-	Router	Releases the configured shortcut option.
cut {default disable enable}

346 A50010-Y3-C150-2-7619