Siemens S223 Privileged Exec View Mode, Privileged Exec Enable Mode, Global Configuration Mode

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

3.1.1Privileged EXEC View Mode

When you log in to the switch, the CLI will start with Privileged EXEC View mode that is a read-only mode. In this mode, you can see a system configuration and information with several commands.

Tab. 3.1 shows main command of Privileged EXEC View mode.

Command	Description
enable	Opens Privileged EXEC Enable mode.
exit	Logs out the switch.
show	Shows a system configuration and information.

Tab. 3.1 Main Commands of Privileged EXEC View Mode

3.1.2Privileged EXEC Enable Mode

To configure the switch, you need to open Privileged EXEC Enable mode with the enable command, then the system prompt will changes from SWITCH> to SWITCH#.

Command	Mode	Description
enable	View	Opens Privileged EXEC Enable mode.

You can set a password to Privileged EXEC Enable mode to enhance security. Once set- ting a password, you should enter a configured password, when you open Privileged EXEC Enable mode.

Tab. 3.2 shows main commands of Privileged EXEC Enable mode.

Command	Description
clock	Inputs time and date in system.
configure terminal	Opens Configuration mode.
telnet	Connects to another device through telnet.
terminal length	Configures the number of lines to be displayed in screen.
traceroute	Traces transmission path of packet.
where	Finds users accessed to system through telnet.

Tab. 3.2 Main Commands of Privileged EXEC Enable Mode

3.1.3Global Configuration Mode

In Global Configuration mode, you can configure general functions of the system. You can also open another configuration mode from this mode.

To open Global Configuration mode, enter the configure terminal command, and then the system prompt will be changed from SWITCH# to SWITCH(config)#.

Command	Mode	Description
configure terminal	Enable	Opens Global Configuration mode from Privileged
		EXEC Enable mode.

A50010-Y3-C150-2-7619 29