Siemens S223, S323 user manual Port Traffic, Fan Operation, Mode Description Threshold Port

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

To show a configured threshold of CPU load, use the following command.

Command	Mode	Description
show cpuload	All	Shows a configured threshold of CPU load.

6.1.12.2Port Traffic

To set a threshold of port traffic, use the following command.

Command			Mode	Description
threshold	port	PORTS		Sets a threshold of port traffic.
				PORTS: port number (1/1, 1/2, 2/1, …)
THRESHOLD {5 60		600} {rx
				THRESHOLD: threshold value (unit: kbps)
tx}			Global
				5 60 600: time Interval (unit: second)
no threshold	port PORTS {rx			Deletes a configured threshold of port traffic.
tx}

i

The threshold of the port is set to the maximum rate of the port as a default.

To show a configured threshold of port traffic, use the following command.

Command	Mode	Description
show port threshold	Enable	Shows a configured threshold of port traffic.
	Global

6.1.12.3Fan Operation

The system fan will operate depending on a configured fan threshold. To set a threshold of port traffic, use the following command.

Command	Mode	Description
		Sets a threshold of fan operation in the unit of centi-
threshold fan START-TEMP		grade (°C).
STOP-TEMP	Global	START-TEMP: starts fan operation. (default: 30)
		STOP-TEMP: stops fan operation. (default: 0)
no threshold fan		Deletes a configured threshold of fan operation.

When you set a threshold of fan operation, START-TEMPmust be higher than STOP-

! TEMP.

To show a configured threshold of fan operation, use the following command.

Command	Mode	Description
show status fan	Enable /Global / Bridge	Shows a status and configured threshold of fan opera-
		tion.

A50010-Y3-C150-2-7619 89