Siemens S323, S223 Associating Dhcp Class, Range of IP Address for Dhcp Class, Text String

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

To delete specified option 82 information for IP assignment, use the following command.

Command		Mode	Description
no relay-information remote-id ip A.B.C.D [cir-
cuit-id {hex HEXSTRING index <0-65535>
text STRING}]
no relay-information remote-id hex HEX-		DHCP	Deletes specified option 82 information
STRING [circuit-id {hex HEXSTRING index <0-
		Class	for IP assignment.
65535> text STRING}]
no relay-information remote-id	text STRING
[circuit-id {hex HEXSTRING index <0-65535>
text STRING}]

To delete specified option 82 information for IP assignment, use the following command.

Command	Mode	Description
no relay-information remote-id all		Deletes all specified option 82	informa-
	DHCP	tion that contains only a remote ID.
	Class
no relay-information all		Deletes all specified option 82	informa-
		tion.

8.8.2.4Associating DHCP Class

To associate a DHCP class with a current DHCP pool, use the following command.

Command	Mode	Description
		Associates a DHCP class with a DHCP pool and opens
class CLASS		DHCP Pool Class Configuration mode.
	DHCP Pool	CLASS: DHCP class name
no class [CLASS]		Releases an associated DHCP class from a current
		DHCP pool.

8.8.2.5Range of IP Address for DHCP Class

To specify a range of IP addresses for a DHCP class, use the following command.

Command	Mode	Description
address range A.B.C.D A.B.C.D		Specifies a range of IP addresses.
	DHCP Pool	A.B.C.D: start/end IP address
	Class
no address range A.B.C.D		Deletes a specified range of IP addresses.
A.B.C.D

A range of IP addresses specified with the address range command is valid only for a

! current DHCP pool. Even if you associate the DHCP class with another DHCP pool, the specified range of IP addresses will not be applicable.

248 A50010-Y3-C150-2-7619