Siemens S323 Broadcast Storm Control, To disconnect, input as below, Storm-control broadcast mul

UMN:CLI	User Manual
	SURPASS hiD 6615 S223/S323 R1.5

[Sample Configuration 2] Accessing from Master Switch to Slave Switch

The following is an example of accessing to Slave switch from Master switch configured in [Sample Configuration 1]. If you show the configuration of Slave switch in [Sample Configuration 1], you can recognize node-number is 2.

SWITCH(bridge)# rcommand 2

Trying 127.1.0.1(23)...

Connected to 127.1.0.1.

Escape character is '^]'.

SWITCH login: admin

Password:

SWITCH#

To disconnect, input as below.

SWITCH# exit

Connection closed by foreign host.

SWITCH(bridge)#

8.11Broadcast Storm Control

The hiD 6615 S223/S323 supports broadcast storm control for broadcast packets. Broad- cast storm is overloading situation of broadcast packets since they need major part of transmit capacity. Broadcast storm may be often occurred because of difference of ver- sions. For example, when there are mixed 4.3 BSD and 4.2 BSD, or mixed AppleTalk Phase I and Phase II in TCP/IP, Storm may occur

In addition, when information of routing protocol regularly transmitted from router incor- rectly recognized by system, which does not support the protocol, Broadcast Storm may be occurred.

Broadcast Storm Control is operated by system counts how many Broadcast packets are there for a second and if there are packets over configured limit, they are discarded.

The hiD 6615 S223/S323 provides not only broadcast storm but also control of multicast and DLF (Destination Lookup Fail) storm. In order to use control of multicast and DLF storm, use the following commands. Then all configurations of Broadcast storm control will be equally applied to all VLANs.

To enable multicast storm control and DLF storm control, use the following command.

Command	Mode	Description
		Enables broadcast, multicast, or DLF storm control
storm-control {broadcast mul-	Bridge	respectively in a port with a user defined rate. Rate
ticast dlf} RATE [PORTS]		value is from 1 to 262142 for FE, and from 1 to
		2097150 for GE

i

By default, DLF storm control is enabled and multicast storm control is disabled.

To disable multicast storm control and DLF storm control, use the following commands

274 A50010-Y3-C150-2-7619