Troubleshooting
This section describes problems you may encounter when using the compact disc player, and includes suggested solutions.
If these suggestions fail to cure the problem, please contact your Meridian dealer for further assistance.
No lights are displayed when switching on
❍Check that your AC power supply is connected correctly.
❍Check that the ON OFF switch on the back panel is in the ON position.
❍Check that the fuse on the compact disc player back panel and the fuse in the unit’s power plug
have not blown; see To change the mains fuse, page 30.
❍Restore power to the compact disc player.
❍Try again to open the disc tray.
There is no sound when playing a disc
❍Check that your preamplifier is switched on, and the volume is at an appropriate level.
❍Check that the compact disc player is connected correctly to the other components of your system; see Connecting the compact disc player, page 18.
❍Check that the correct source has been selected on your preamplifier.
❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.
Troubleshooting
28
The tray will not open
❍Check that the standby display is shown.
If the standby display is shown:
❍Switch off the compact disc player and disconnect it from the AC power supply.