To connect to other Meridian 500
One unit will then be designated
Series equipment
as the controller, and display:
Con.
● Connect one of the COMMS sockets on the back panel of the |
compact disc player to one of the COMMS sockets on |
another 500 Series unit, using the 500 comms lead provided |
This is the unit that will respond to the remote.
All the other units will be configured
with the other unit. |
as
N.Con.
The sequence in which you connect the units is not important.
507 Compact Disc Player | 500 Series unit |
COMMS | COMMS |
Then configure the units with the following automatic setup procedure:
●Switch all the units to standby.
●Press Clear on the remote.
Your system is now set up and ready for use.
If for any reason the automatic setup does not give the configuration you want, restore the default operation by selecting the standard type; see Choosing standard settings, page 24.
Note: Do not, under any circumstances, connect any equipment other than Meridian 500 or 800 Series to the socket marked COMMS on the back of the compact disc player.
Setting up the compact disc
Each unit will display:
Auto
player
19