Switching on and off
During normal use the compact disc player should be left in the standby state. This uses a negligible amount of electricity, but ensures that the components of the compact disc player operate at maximum efficiency from the moment you start playing a disc.
If you are not going to use the compact disc player for a period of several days you should switch the unit completely off, at the back panel, and disconnect it from the AC power supply.
To switch on from standby
●Press Open, *, =, or >(front panel), or select a source on the remote.
To insert a disc
To switch to standby
Using the
● Press Open (front panel) to open the drawer. |
● Place your disc, label side up, in the tray as shown opposite. |
●Press Off.
The display will show:
.
compact
● Press Open (front panel), Function * (remote), or >to close |
the tray. |
If you have other Meridian 500 Series equipment connected to the compact disc player, these units will also switch to standby.
If a disc is currently playing, switching to standby will stop the disc, and the disc can safely be left in the unit.
disc player
9