The Protocol Menu allows you to select 802.3, which is the default packet type for NetWare versions 3.12 and up, or 802.2 (NO SNAP), which is the default packet type for NetWare versions prior to 3.12, as the Novell protocol frame type used on your network. The factory default is 802.3.

The Timeout menu allows you to set a timeout for the Novell Print Server emulation. If the printer cannot locate an assigned file server during the selected time, the Novell Print Server emulation is disabled. When the file servers are active on the network again, enable the Novell Print Server interface using XANTÉ Command Center or the printer’s front panel. Options are Never and 5 minute increments to a maximum of 30 minutes (the factory default).

IP Address Configuration

When using the IP Address interface, use the keys on the front panel to set the address as follows:

Reset key increases the current number flashing by one.

Menu key moves to the next number to the right of the current number flashing.

Test key moves to the next number to the left of the current number flashing.

Enter key accepts new address (if valid) and returns to I/F: IP Address menu. The menu will display a message if the address entered is invalid.

Note: You must turn the printer off and restart it for the new IP address to take effect.

Jam Recover

The Jam Recover feature reprints the last page processed after a paper jam is cleared.

_______________________________________

Configuration 6-25

Page 199
Image 199
Xante 3 Series warranty Jam Recover, IP Address Configuration