Xante 3 Series warranty Change the EtherTalk Zone Name, Enter the new name for the EtherTalk zone

•Select the Phase 2 driver through the Network Control Panel under Apple menu: Control Panels on a Macintosh with an older operating system (System 6.X and earlier).

•Select Ethernet from the drop down menu in the AppleTalk Control Panel under Apple menu: Control Panels on a Macintosh with an operating system that supports Open Transport (System 7.5 and later and some versions between 6.X and 7.5).

Change the EtherTalk Zone Name

On an EtherTalk network with more than one zone, the network

router assigns your printer a default zone. Check with your System Administrator to determine the correct zone for your printer; then, if necessary, change the printer’s zone name using XANTÉ Command Center.

Using XANTÉ Command Center

1.Open XANTÉ Command Center by double-clicking its icon.

2.Choose Networking: AppleTalk: EtherTalk Zone Name.

Fig. 5.1 EtherTalk Zone Name Window

3.Enter the new name for the EtherTalk zone.

Note:	EtherTalk zone names are limited to 32 characters, are		= (equal), ≅
	not case sensitive, and cannot include the
	(approximately equal),	* (asterisk), : (colon), or @
	(at) characters.

4.Click OK to return to the Command Center main menu.

5-4 Ethernet Setup ______________________________________