Xante 3 Series Cleaning the Printer, Fuser Assembly Cleaning, Turn off and unplug the printer

1.Turn off the printer; then unplug the power cord from the power source.

2.Remove all media from the multipurpose feeder and close it and, if necessary, the top cover. See chapter 2 for instructions.

3.Remove any installed optional feeder or duplexer (see chapter 10, “Options,” for details). Never move the printer with an optional feeder or the optional duplexer installed.

4.Remove the toner cartridge following the procedure in chapter 2. Never move the printer with the cartridge installed.

a.Place the cartridge in its original bag to protect it from light. If you no longer have this bag, place the cartridge in a dark bag or wrap it in a dark cloth.

b.Ensure the cartridge stays level during the move. Rock it gently to redistribute toner before reloading the cartridge in the printer. See “Toner Cartridge” in chapter 2.

5.Remove all interface cables and the power cord.

6.Move the printer to a location that meets the guidelines in “Printer Location” in chapter 2.

7.Set up the printer following the instructions in chapter 2.

Cleaning the Printer

To help keep your printer running smoothly and avoid unnecessary problems, perform the following cleaning steps monthly. Also, clean the printer inside after removing a paper jam or replacing the toner cartridge.

Fuser Assembly Cleaning

1.Turn off and unplug the printer.

_________________________ Maintenance and Specifications 9-5