Xante 3 Series warranty Sheet Feeder, Removing the Paper Cassette Feeder

Removing the Paper Cassette Feeder

1.Make sure the printer displays a PLEASE WAIT or READY/IDLE message. Then, turn off the printer and disconnect the power cord from the power supply (fig. 2.6).

2.Remove media from the multipurpose feeder and the output tray; then, close the multipurpose feeder.

3.Remove all paper cassettes from the printer. Pull each cassette out until it stops. Lift up slightly and remove it from the printer (figs. 2.16 and 2.17).

4.Remove the screws that secure the feeder to the printer (fig. 10.3).

Warning! The printer weighs approximately 58.5 lbs (26.5 kg) without toner, cassettes, and media installed. Always have two people lift the printer using the recessed grip areas on the right and left sides.

5.Lift the printer off the feeder vertically until the printer is free of the feeder’s stubs (fig. 10.2). Set the printer on a stable surface that will support its weight.

6.Repack the feeder in its original box and store it in a location that meets the guidelines in “Printer Location” in chapter 2.

7.Set the printer up again following the instructions in chapter 2.

2,000 Sheet Feeder

This section describes installing, loading, and removing the optional 2,000 sheet paper feeder. This feeder can be installed as one of the two additional paper feeders on your printer. The 2,000 sheet feeder supports letter and A4 size paper.

10-8 Options __________________________________________