Xante 3 Series warranty Transfer Roller Cleaning, Transfer Roller Maintenance and Specifications

7.Vacuum the area using a soft brush attachment or blow compressed air into the printer.

Warning! Wear protective safety glasses when using compressed air.

Caution: Do not pull out any wires while performing this step.

8.Slide the left side of the fuser assembly under the metal bracket and lower into place.

9.Tighten the two screws.

10.Close the fuser cover assembly.

Transfer Roller Cleaning

1.Turn off and unplug the printer.

2.Remove the toner cartridge.

3.Remove the roller assembly by turning up the roller’s plastic levers, one on each end (fig. 9.2); then, holding the levers, lift the transfer roller up and out at a 45˚ angle.

Fig. 9.2 Transfer Roller

_________________________ Maintenance and Specifications 9-7