Xante 3 Series warranty Open the fuser cover assembly fig, Fuser Assembly

Warning! Allow fuser assembly to cool before removing.

2.Open the fuser cover assembly (fig. 9.1).

Fig. 9.1 Fuser Assembly

3.Loosen but do not remove the two thumb screws located on the right side of the printer.

4.Lift up on the right side of the fuser assembly, using the orange

tab. Pull the right side of the fuser toward you, while sliding the entire unit to the right. Then lift the assembly out of the printer using the orange tabs.

5.After removing the fuser assembly, pull down on the two green tabs to open the unit.

6.Clean both rollers with denatured alcohol and a lint-free cloth. (Turn the fusing unit upside down to access the fusing roller.)

Caution: To prevent printer damage, wipe area lightly; do not rub.

9-6 Maintenance and Specifications ________________________