Xante 3 Series Common Specification for all Densities, Supported Densities and Organizations

Bank 0/0	16 MB	16 MB	64 MB	64 MB	64 MB
Bank 0/1	16 MB	16 MB	64 MB	64 MB	64 MB
Bank 1/0		16 MB		16 MB	64 MB
Bank 1/1		16 MB		16 MB	64 MB
Total RAM	32 MB	64 MB	128 MB	160 MB	256 MB

The following are SODIMM specifications for you printer.

Note: If you purchase SODIMMs from a vendor other than XANTÉ, you should test the RAM before purchasing large quantities. XANTÉ tests show some vendor’s RAM, manufactured to specifications, is incompatible with our printers. XANTÉ cannot guarantee the performance of RAM sold by other vendors.

Common Specification for all Densities

Module type:	72-pin SODIMM
Organization:	x32
Parity:	none
Power voltage:	3.3V
I/O voltage:	3.3V tolerant
Speed:	60 ns or better
Mode:	EDO
Refresh:	CAS before RAS
Contact:	gold
Dimension:	2.3" (length) x 1.5" (max height)

Supported Densities and Organizations

Density	Org	Config	RAS/CAS	Quantity
			Addressing
16 MB	4M x 32	4M x 4 bit	11/11	8
64 MB	16M x 32	4M x 4 bit	12/12	8

10-28 Options __________________________________________