Xante 3 Series warranty PSFiles Folder, Load and configure the Adobe PostScript printer driver

PDFs Folder

This folder contains PDFs (Printer Description Files) for each XANTÉ printer. QuarkXPress versions prior to 3.3.2 require these files in addition to the PPD. Use these PDFs to ensure the highest quality output from your printer and QuarkXPress.

The XANTÉ Utilities Installer loads the QuarkXPress PDF. To load these PDFs manually

1.Load and configure the Adobe PostScript printer driver and

your printer’s PPD following instructions in “Adobe PostScript Printer Drivers” earlier in this chapter.

2.Copy the XANTE_3S.PDF for the series 3 printers from the

PDFs folder to the Xpress\PDF directory on your PC by typing the following command, substituting the drive letter containing the XANTÉ Utilities CD-ROM for [Drive].

COPY [Drive]:\PDFS\XANTE_3S.PDF C:\XPRESS\PDF ↵

See the QuarkXPress section in the appendix for additional information.

PS_Files Folder

This folder contains Adobe PostScript files to help setup and maintain your printer and a PDF file, Overview.pdf, which describes these files.

These files can be downloaded to your printer using Send PostScript File in XANTÉ Command Center (see “XANTÉ Command Center”

later in this chapter) or by typing the following DOS command, substituting a different port, if necessary:

COPY FILENAME.PS LPT1 ↵

Clean.ps prints cleaning instructions for the Accel-a-Writer 8100, 8200, and PlateMaker II.

___________________________________________ PC Setup 4-25