Xante 3 Series warranty Positive Film Technology Density, Electrophotography EP1, Toner Control

Note: Throughout this document, all references to media are shown as PAPER (the factory default). The same menu settings apply to Film, Hvypaper (heavy paper), Hvyfilm (heavy film), and five user-defined types of media.

The MEDIA:CONFIG menu allows you to select media types and choose submenus to configure that media’s Density (Positive Film Technology), EP1 (toner control), EP2 (humidity control), Fuser Temperature, and NEIT (if available).

Positive Film Technology (Density)

Positive Film Technology allows you to control the toner intensity for positive film output. The amount of toner applied to a positive image increases as the PAPER:DENSITY configuration menu settings increase from 0 to 20. The default setting depends on the selected media. The default for paper and film it is 7.

This menu is active only if Negative Print is set to False in the Print dialog box.

Electrophotography (EP1, Toner Control)

The PAPER:EP1 menu helps reduce toning by controlling the level of toner transferred from the toner drum to the media. Options are 0 up to 15. The default setting depends on the selected media. The default setting for paper and film is 10.

Electrophotography (EP2, Humidity Control)

The PAPER:EP2 menu allows you to make adjustments for changes in humidity during printing, thereby reducing ghosting. Humidity can affect toning on plates and the density on negatives.

Options are 0 to 10. The default depends on the selected media; the defaults are 5 for paper and heavy paper, and 3 for film and heavy film.

Note: This setting will affect the density of your halftones, so you may need to relinearize if you change the EP2 setting.

_______________________________________ Configuration 6-27