Xante 3 Series warranty Novell NetWare Configuration, Configure the Novell Server

5.Choose File: Quit to close Command Center.

6.Restart the Printer to make the new zone name effective.

Novell NetWare Configuration

The Ethernet upgrade allows your printer to support EtherTalk, Novell NetWare print server, NetBEUI, and TCP/IP protocols concurrently.

In a Novell network, users send print jobs to a queue on a server. The print server monitors these queues and submits the jobs to the appropriate network printer. Your printer can service multiple print queues on up to four file servers.

The following steps are required to set up your XANTÉ printer on a Novell network. Chapter 2 covers step 1, this section covers steps 2 through 4, and chapter 3 (Macintosh) or 4 (PC) covers step 5.

1.Connect your XANTÉ printer to the network through the Ethernet port.

2.Configure the Novell server, assigning the print server (your printer) access to specific queues.

3.Configure the print server emulation to direct your printer to poll the appropriate Novell server(s).

4.Configure the Novell print server interface on your printer.

5.Install and configure the Adobe PostScript driver on the individual workstations.

Configure the Novell Server

Using a Novell utility, your Novell System Administrator sets up and names the print servers and print queues on the Novell server. This section covers selecting Novell names and then configuring for

Novell NetWare Versions 3.X, 4.X, or 5X.

_______________________________________ Ethernet Setup 5-5