The XANTÉ Utilities folder contains XANTÉ Command Center, Adobe Downloader, a Downloader readme file, and the XD-1 (densitometer) software. See “XInstaller,” “XANTÉ Command Center,” “Adobe Downloader,” and “Calibration with a Densitometer (Gamma)” later in this chapter to load and ;use these files.

XInstaller is an installation program for XANTÉ Command Center, Adobe Downloader, your printer’s PostScript PPDs, and the appropriate PDF (Printer Description File) for QuarkXPress (if it is installed on your system), and the XD-1 software. See “XInstaller” later in this chapter. Always check the CD-ROM Readme files before printing.

Adobe Acrobat Reader 3.0

XANTÉ Utilities CD-ROM documentation is in Adobe Acrobat

Portable Document Format (PDF). To install Adobe Acrobat Reader 3.0

1.Insert the XANTÉ Utilities CD-ROM into your Macintosh.

2.Double-click the XANTÉ Utilities 4.0 icon; then, double-click the Acrobat icon.

3.Check the ReadMe-Reader file; then, double-click the Reader

3.0Installer icon to install Acrobat Reader 3.0.

XInstaller

Use XInstaller to load XANTÉ Utilities, your printer’s PPD, and

your printer’s QuarkXPress PDF (if QuarkXPress is installed on your system), and to launch the AdobePS 8.6 driver installer.

1.Insert the XANTÉ Utilities CD-ROM. Double-click the XANTÉ Utilities CD icon; then, double-click the XInstaller icon.

2.Click Continue.

_____________________________________

Macintosh Setup 3-5

Page 43
Image 43
Xante 3 Series Adobe Acrobat Reader, Use XInstaller to load Xanté Utilities, your printer’s PPD, Click Continue