Xante 3 Series warranty Using the Densitometer, Densitometer, like any other precision instrument

e.Click Print Calibration Page (fig. 3.15). The calibration page shows the printer’s performance using no gamma curve correction (fig. 3.16).

Note: Print only one calibration page (using the Print Calibration Page button) at the beginning of the calibration process. Printing this page again later in the process resets the calibration, cancelling any linearization you have already done.

Fig. 3.16 Sample Calibration Page

Using the Densitometer

A densitometer uses a standard light source to measure the amount of light reflected from printer output. This measurement is compared to a standard and expressed as a percentage of gray.

The densitometer, like any other precision instrument,	must be
calibrated before each use. Refer to your densitometer’s
documentation for instructions on calibrating and using the
densitometer.

_____________________________________ Macintosh Setup 3-35