Xante 3 Series warranty Start-up, Toner Cartridge Control, Redistributing Toner

Start-up Page

The Start-up Page feature prints a page that lists the selected resolution, installed RAM, hard disk identities, page count, enabled interfaces, and network information (if the Ethernet upgrade is installed) each time the printer is turned on.

Set Start-up Page from the MISC:STRTUP PAGE configuration menu, from XANTÉ Command Center on a Macintosh, or by downloading Adobe PostScript files to the printer.

In the MISC:STRTUP Page menu, Yes (the factory default) enables the feature and No disables it. In XANTÉ’s Macintosh Command Center, the General: Startup Page menu allows you to turn the Start-up Page feature on or off or to print this page on demand.

XANTÉ Utilities CD-ROM contains the PostScript files Startpg.on and Startpg.off. Download these files to the printer to enable (Startpg.on) or disable (Startpg.off) the feature. See “Downloads Folder” in chapter 3 (Macintosh) and “PS_Files Folder” in chapter 4 (PC) for instructions.

To print a start-up page manually, take the printer off line and press the Test key. After the page prints, press the Online key to put the printer back on line.

Toner Cartridge Control

If your printer does not produce the rich, black images that you expect, try redistributing the toner in the cartridge and adjusting the print density before replacing the toner cartridge.

Redistributing Toner

If you have not used the toner cartridge in several days, toner may have settled. Remove the cartridge from the printer, and shake the cartridge gently to redistribute toner. Replace the cartridge in the printer. See “Toner Cartridge” in chapter 2.

_______________________________________ Configuration 6-37