Note: If your printer is configured as a Novell Print Server and the Novell network becomes unavailable, the printer may disable the Novell Print Server interface. When the Novell network is available, re-enable the interface using the front panel configuration menus or XANTÉ Command Center.

Make sure the Macintosh or PC is configured properly to communicate using the Ethernet connection. See chapter 5.

Make sure the printer is on line. See “Interface Control” in chapter 6.

Make sure the network is available.

Reduce the number of items on the network to determine the source of the problem.

Make sure that you are using a crossover or UTP test cable if your are using twisted pair cable to direct connect a printer and a Ethernet configured host without a hub.

Do not use a transceiver that allows devices to daisy chain on a twisted pair network.

When I print an image that I have scanned, it is so dark that much of the detail is lost.

Adjust the printer’s gamma setting to change the image’s midrange grayscale values. See “Halftone Calibration Technology (Gamma)” in chapter 6.

Rescan the image with a higher resolution. Generally, black and white images should be scanned at a resolution of 2 times the line screen desired on the printed output. Multiply this number by the ratio of the printed output size to the original image size.

SR = Print Image LPI x 2 x Image Size Ratio SR = the Scan resolution

Image Size Ratio = printed image size/original image size

_____________________________________ Troubleshooting 11-9

Page 291
Image 291
Xante 3 Series warranty Troubleshooting