Xante 3 Series warranty Remove the Sodimm

Fig. 10.33 Remove the SODIMM

4.Install the new SIMM or SODIMM using the following steps.

Note: Install the DRAM SIMM closest to the back of the printer first.

a.Align the SIMM or SODIMM over its bank using the following appropriate step.

1)Flash ROM SIMM—tilt the SIMM 45° toward the back of the board (toward the interfaces) with the notched corner toward the top of its bank.

2)FIFO SIMM—tilt the SIMM 45° toward the top of the board with the notched corner to the left of its bank.

3)SODIMM—hold the SODIMM straight above its bank with the notched corner toward the center of the DRAM bank.

___________________________________________ Options 10-31