To Enable the Spooler

1.Open XANTÉ Command Center and select Controller: Spooler. The Spooler window appears.

Fig. 4.19 Configure Menu in the Spooler Window

2.Choose Configure: Spool Device). The Select Spool Device window appears (fig. 4.20).

Fig. 4.20 Select Spool Device Window

3.Select the disk to store the spooled jobs (or select NONE to disable spooling); then click OK. The Spooler window reappears (fig. 4.19).

4-34 PC Setup

__________________________________________

Page 122
Image 122
Xante 3 Series warranty To Enable the Spooler, Configure Menu in the Spooler Window