Xante 3 Series warranty Printing Double-Sided Copy, Manual Double-Sided Copy

Use the following guidelines and the procedure in “Tray Selection Options” in chapter 6 when tray chaining.

•All selected media sources must contain the same size media. If the printer detects a different size media when it switches to a new tray, a PAPER OUT message appears.

•All trays must be properly inserted. When tray chaining is enabled, an incorrectly positioned tray will prevent the printer from printing.

Printing Double-Sided Copy

You can print double-sided copy manually by feeding paper through the printer twice or automatically with the optional duplexer.

Manual Double-Sided Copy

1.Print the first side of the paper.

2.Remove the paper from the output tray, straighten any curling edges, and allow it to cool thoroughly.

3.Load the paper using the following guidelines:

Note: For best results when printing on the second side, feed sheets individually or slip-feed (feed a blank sheet between each printed sheet) to prevent toner from sticking to adjacent pages.

a.Determine whether to load the media short or long edge first. See “Loading Media” earlier in this chapter.

b.Print a test page or check your software documentation to determine the orientation of the media’s top edge.

c.Load media into the multipurpose feeder print side up.

4.Print the second side.

_______________________________________ Media Options 7-11