Xante 3 Series Windows 95, 98, and NT 4.0 Drivers, Insert the Xanté Utilities CD-ROM into your PC

4.Use Notepad or another ASCII text editor to delete the

following entries from the Win.ini file in the Windows

directory. Only delete the lines indicated by notes in the right column; the other lines are to help you locate the entries.

[<printer_name>,<port>]	<<<Delete this line
PrinterName=<printer_nickname>	<<<Delete this line
[devices]
<printer-name>=ADOBEPS,<port>	<<<Delete this line

[PrinterPorts]

<printer_name>=ADOBEPS,<port>,15,45,… <<<Delete this line

If the device= line in the [windows] section of the Win.ini file refers to AdobePS, delete that line also.

Windows 95, 98, and NT 4.0 Drivers

For Windows 95 and 98, the AdobePS 4.1 driver supports Adobe PostScript Level 2; the AdobePS 4.2 and 4.3 drivers support Adobe PostScript 3 and earlier. (Occasionally some systems have problems with the 4.3 driver; in this case, use the 4.2 driver.)

The AdobePS 5.X driver supports Adobe PostScript 3 and PostScript Level 2 on Windows NT 4.0 systems. This section describes installing and configuring these drivers and your printer’s PPD.

Installing the AdobePS Printer Driver and Printer PPD

1.Go to step 2 (AdobePS 4.3) or step 3 (AdobePS 5.X) if the XANTÉ Utilities Installer automatically launches the AdobePS printer driver installation program. If not, use the following procedure to launch it.

a.Insert the XANTÉ Utilities CD-ROM into your PC.

b.Start Windows; then, close all Windows applications and spooling programs.

4-14 PC Setup __________________________________________