Xante 3 Series warranty Curve correction fig Any linearization you have already done

e.Click Print Calibration Page (fig. 4.23). The calibration page shows the printer’s performance using no gamma

curve correction (fig. 4.24).

Note: Print only one calibration page (using the Print Calibration Page button) at the beginning of the calibration process. Printing this page again later in the process resets the calibration, cancelling

any linearization you have already done.

Fig. 4.24 Sample Calibration Page

Using the Densitometer

A densitometer uses a standard light source to measure the amount of light reflected from printer output. This measurement is compared to a standard and expressed as a percentage of gray.

___________________________________________ PC Setup 4-39