Xante 3 Series warranty Instead of my image or text, the output is a solid black

Instead of my image (or text), the output is a solid black page.

•The density setting may need adjusting. See “Adjusting Print Density” in chapter 6.

•The toner cartridge may need replacing. See “Toner Cartridge” in chapter 2.

Blank areas appear in my image (or text).

•Media may be damp or otherwise damaged.

Make sure the media meets the requirements in “Media Specifications” in chapter 7. If necessary, replace the media. See “Paper Cassette” and “Multipurpose Feeder” in chapter 2.

•The sealing tape may not be pulled completely out of the toner cartridge. Remove the cartridge and pull out the tape. See “Toner Cartridge” in chapter 2.

Media comes out of the printer creased or crumpled.

•Media may be damp or otherwise damaged. Make sure the media meets the requirements in “Media Specifications” in chapter 7. If necessary, replace the media. See “Paper Cassette” and “Multipurpose Feeder” in chapter 2.

•Media may be loaded improperly. Make sure it is loaded print side up.

_____________________________________ Troubleshooting 11-13