6.Click OK in the Autosetup failed dialog box; the Installable Options window appears (fig. 3.6).

Fig. 3.6 Installable Options Window

7.Configure the printer’s options.

a. Select Installed for the upgrades installed on your printer.

Note: If your printer has two cassette trays, select Upper Optional Tray: Installed. If it has three cassettes, select Upper Optional Tray: Installed and Lower Optional Tray: Installed.

b.Select True for Spooler Enabled to activate the Save Spooled Job menu in your application Print dialog box if your system has an optional internal hard disk.

Note: This does not enable the Spooler on your printer. The Spooler must be enabled on your printer using either the front panel Interface menus or XANTÉ Command Center. See “Spooler” in chapter 6 and “Spooler” later in this chapter for details.

c. Select the amount of RAM installed on your printer.

8.Click OK twice. The Chooser window reappears. Then, close this window.

3-16 Macintosh Setup

____________________________________

Page 54
Image 54
Xante 3 Series warranty Select the amount of RAM installed on your printer, Installable Options Window