Xante 3 Series warranty Under Manual Feed Options, if you are using standard, 254.0 190.5

b.Under Manual Feed Options, if you are using standard

size media, click Standard Paper Size and select the size from the drop-down menu. If you are using a custom

size, click Custom Paper Size and enter the size and select the unit of measure (inch, millimeter, or centimeter).

c.Under Print Settings, select the resolution from the drop-down menu. Click the Negative Film box if you are printing negative output.

d.Click OK. The More X-ACT window reappears.

5.Click Print Calibration Page.

A

A

	Measure dashed line from left edge of
	paper to top arrow tip; enter results in
B	millimeters in box A.	D

C

B

Measure dashed line from top edge of paper to left arrow tip; enter results in millimeters in box B.

C

Measure solid horizontal line from left arrow tip to right arrow tip; enter results in millimeters in box C. This should be

close to the value shown in box H.

D

Measure dashed line from top edge of paper to right arrow tip; enter results in millimeters in box D.

EE

Measure solid vertical line from top arrow tip to bottom arrow tip; enter results in millimeters in box E. This should be close to the value shown in box G.

I

F

Measure dashed line from left edge of paper to bottom arrow tip; enter results in millimeters in box F.

F

I

Measure dashed line from bottom edge of paper to left arrow tip; enter results in

millimeters in box I .

G254.0

H190.5

J

Measure dashed line frombottom edge of paper to bottom arrow tip; enter results in millimeters in box J.

J

Fig. 22 X-ACT Calibration Page

3-44 Macintosh Setup ____________________________________