Xante 3 Series warranty Your printer, LPR interface on the optional Ethernet port

–The General screen gives the product name, the PostScript version, the amount of RAM installed, the margin (Page Align) settings, and the size and status of storage devices configured on the printer.

–The Diagnostic screen provides an EEPROM status update.

–Your Product Information screen lists the product name.

•I/O Timeout allows you to select the number of seconds the printer waits for additional incoming data before cancelling a job and returning to the idle state, ready to accept another job.

•Print Info allows you to print a copy of the same information available through Get Info.

•	Receive Queue	gives you access to a buffer that stores
	PostScript processing information. Check this file for
	information if you receive a PostScript error while printing.
•	Reset Controller	allows you to reboot and reinitialize the printer
	from your computer.

•Send Ctrl-Dsends a Control-D (PostScript’s end-of-job marker) to the printer.

•	Send PostScript File	allows you to download PostScript files to
	your printer.
•	Set Printer Name	allows you to rename your printer on a

network other than Novell. Your printer’s default name is the product name, which can be confusing on networks where there may be more than one printer of the same model.

•Status provides a fast, easy method to check current printer status. For example, it can indicate if your printer is idle (ready to receive and process new data) or busy.

•	TCP/IP Address	allows you to set the address or enable the
	LPR interface on the optional Ethernet port.

___________________________________________ PC Setup 4-29