6-32 Configurationbb ______________________________________
Use the Test ← key to lower or the Menu → key to raise the value to
the desired amount. Then, press the Enter ↓ key to confirm the
selection.
Lines/Inch
Use the Lines/Inch menu, PCL5:LINES/INCH to select from 1 to 48
lines per inch (lpi) to print. The factory default is 6.
Use the Test ← key to lower or the Menu → key to raise the value to
the desired amount. Then, press the Enter ↓ key to confirm the
selection.
Orient
Use the Orient Menu to select the page orientation. Options are
Portrait (the factory default) and Landscape. Portrait (tall) printing
goes across the narrower dimension of the page; landscape (wide)
printing goes across the wider dimension of the page.
Line Wrap
Use the Line Wrap menu to enable (On) or to disable (Off) line
wrap. When line wrap is enabled, text will automatically continue on
the next line when it reaches the end of the current line. The factory
default is Off.
Font
The Font menu contains Source, Number, Height, and Sym Set
submenus.
Source
Use the Source menu to designate internal fonts for use by the
printer. This menu is for future developments and should not be
changed. The factory default is the letter l.
Number
Use the Number menu to designate a font number for the printer’s
use. This menu is for future developments and should not be
changed. Numbers run from 0 (the factory default) to 67.
Height
Use the Height menu to designate the font’s height in points.