Xante 3 Series warranty Managing Custom Gamma Curves

5.Click Close; the Linearization window closes. Then, select File: Exit to close Command Center.

Managing Custom Gamma Curves

You can retrieve custom gamma curves (that you created or downloaded using the densitometer and Command Center) from your printer and save them on your system. These files can be downloaded to the printer again as needed.

To manage custom gamma curves, open XANTÉ Command Center and select Graphics: Linearization. The Linearization window appears (fig. 4.23). Then use one of the following procedures to manage your custom gamma curve.

•To retrieve a custom gamma curve from the printer, click Load from printer.

•To retrieve a custom gamma curve saved to your PC, click Load and select the file.

•To save a custom gamma curve to your PC, retrieve it from the printer using Load from printer; then click Save.

•To save a custom gamma curve to your printer, retrieve it from your PC using Load. Select the custom gamma curve to be updated from the Update Transfer Curve list; and click Save to printer.

Resetting Custom Curve Defaults

You can reset one or all custom curves to the factory setting(s).

To reset a custom gamma curve to the factory default (which is a copy of the standard Gamma 0 curve)

1.Highlight the curve to change in the Update Transfer Curve list in the Linearization window and click Reset Curve(s) (fig. 4.23). The Reset Curves window appears.

___________________________________________ PC Setup 4-43