Xante 3 Series warranty Removing the Controller Board Panel, Loosen the Panel Screws

Removing the Controller Board Panel

1.Make sure the printer displays a PLEASE WAIT or READY/IDLE message. Then, turn off the printer and disconnect the power cord from the power supply (fig. 2.6).

2.Remove any media in the multipurpose feeder and output tray.

3.Loosen the two screws on the back of the printer that secure the controller board access panel to the printer (fig. 10.28).

Fig. 10.28 Loosen the Panel Screws

4.Slide the panel toward the back of the printer until it stops. Pull the panel down and out to remove it from the printer (fig. 10.29).

Fig. 10.29 Remove the Panel

10-26 Options __________________________________________